• High Reliability - Rated to 70C to operate in high temperatures at the solar module. More reliable than controllers mounted inside the junction box. Uses very low on-resistance power MOSFETs. No need to re-rate.
• Outdoor Rated - ETL approved for outdoor use without an additional enclosure. Rugged IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box.
• Extensive Electronic Protections - Fully protected against reverse polarity, short circuit, overcurrent, lightning

and transient surges, high temperature and reverse current at night.

• Longer Battery Life - Series PWM with 3 stage charging: bulk, PWM regulation and float. Includes temperature compensation at the controller or alternatively at the battery when using optional remote temperature sensor. Able to charge a zero voltage battery.
• Rated for Hazardous Locations - Specifically designed for solar power systems in the oil/gas industry.

Approved for use in Class 1, Division 2, Groups A,B,C,D.

• More Information - Bi-color LED is easy to read from the ground when the solar module is pole-mounted. Indicates solar charging, regulation, normal nighttime operation and any controller or system faults.
• Easy to Install - Fits standard half inch conduit knockout (PG 13.5, M20) in module junction box. Quickly fastens with included locknut. Wires have fork connectors for easy connection to solar module terminals.
• Rated Solar Input: SK-6 6 amps
• Nominal System Voltage 12 Volts
• Min. Battery Voltage 0 Volts
• Max. Solar Voltage 30 Volts
• Self-Consumption Charging 7mA Night 2 mA
• Voltage Accuracy 150 mV
• Regulation Voltage 14.1 Volts (at 25C)
• Float Voltage 13.7 Volts (at 25C)
• Type of Charging Series PWM

3 stage: bulk, PWM and float

• Temperature Compensation (3 choices)

Reading temp at controller 30 mV / C Attaching remote temp sensor 30 mV / C Disable temp comp Defaults to 25C

• Ability to Charge a Zero Voltage Battery

Electronic Protections

• Reverse Polarity
• Short Circuit
• Overcurrent

Environmental Specifications

• Operating Temperatures 40C to +70C
• Humidity 100%
• Tropicalization Encapsulated in epoxy
• Dimensions 99 x 51 x 13 mm

(3.9 x 2.0 x 0.5 inches)

• Weight 0.11 kg / 0.25 lbs
• Enclosure IP65
• Fitting to Module J-box PG 13.5, M20, 1/2 inch conduit
• Wire Size 2.0 mm2 (#14 AWG)
• Wire Terminations #8 fork connectors