iBuySolarPanels.com - Blue Sky SB2512iX Solar Boost 25 with Inpro Reomte Capabilities

Questions? Call us at

888-634-4289

Batteries and Chargers

Converters

Inverters

Mobile Solar Power

Portable Solar Products

Brinkmann Landscape Lights

more brands

Blue Sky SB2512iX Solar Boost 25 with Inpro Reomte Capabilities

MSRP: $332.09

Our Price: $253.50

You Save: $78.59

Manufacturer: Blue Sky

Mfg. ID: SB2512iX

Sku: BLS0014

Weight: 1#

Product Description:

Patented Maximum Power Point Tracking technology allows Solar Boost 2512i and Solar Boost 2512iX to increase charge current up to 30% or more compared to conventional charge controllers. Dont waste your money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller. The low cost Solar Boost 2512i provides an advanced fully automatic 3-stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less maintenance. A partial IPN network interface is also included to allow use of the IPN-Remote or IPN-ProRemote displays.

Specifications

Output Current Rating 25 Amp maximum, automatic 25 Amp output current limit
Nominal Battery Voltage 12VDC
PV Input Voltage 35VDC maximum
Power Consumption 0.35W Typical standby ?? 1.0W Typical charge on
Charge Algorithm 3-stage Bulk/Acceptance/Float ?? Charge time in Acceptance fixed at 2 hours (Range 0 10 hours ) (Full charge can be based on net charge current matched to battery amp-hours )
Acceptance Voltage 14.2VDC Fixed Value (10.0 20.0VDC )
Float Voltage 13.2VDC Fixed Value (10.0 20.0VDC )
Power Conversion Efficiency 97% @ 14 Volt 20 Amp Output
Physical Configuration and Dimensions Open frame construction with conformal coated electronics mounted to rear of 5.3 x 5.3 (13.5cm x 13.5cm) clear anodized aluminum face plate. Electronics extend 1.9 (4.83cm) behind front panel. Mounts into standard 411/16 (11.9cm) square electrical box which is included, Raco p/n 8257 or equivalent.
Analog Input Accuracy / Range Battery and PV voltmeters, 35.0VDC 0.50% FS Input/Output ammeters, 30.0A 0.50% FS
Communication IPN Network interface for IPN displays only. Full IPN interface to allow multicontroller coordination not provided.
Environmental -40 +40??C, 10 90% RH non-condensing
Equalization Voltage 15.2VDC Fixed Value (range 10.0 40.0VDC ) automatic Fixed at 2 hours each 30 days, may be disabled (time and day settings variable , or equalize can be manually actuated )
Auxiliary Output Function Single output field configurable as either: 25 Amp load controller or 2 Amp auxiliary battery charger
Aux. Battery charge 2 Amp typical, same charge voltage as primary battery
Load Control 25 Amp maximum; ON @ 12.6VDC / OFF @ 11.5VDC (Range 10.0 40.0VDC ), or net battery amp-hours )
Temperature Compensation Optional temperature sensor adjusts charge voltage setpoints based on measured battery temperature, -5.00 mV/??C/cell correction factor (Range -0.00 -8.00 mV/C/cell ) sensor range -60 +80C
Auxiliary Battery Voltage Auxiliary battery voltmeter, 35.0VDC ??0.50% FS
Communication Complete IPN Network interface. Allows up to 8 IPN capable controllers to set up and operate as a single machine, share a common battery temperature sensor, and share an IPN-Remote or IPN-ProRemote display. Simple twisted pair cable interface with no special communication hardware required.